Delivery of sound and lighting equipment for the Polish Baltic Philharmonic. Fryderyk Chopin in Gdańsk. 4) Delivery and installation of symphony orchestra lighting along with effect lighting with an LED source in the Concert Hall - wash lamps - 4...

Delivery of sound and lighting equipment for the Polish Baltic Philharmonic. Fryderyk Chopin in Gdańsk. 4) Delivery and installation of symphony orchestra lighting along with effect lighting with an LED source in the Concert Hall - wash lamps - 4 pieces
1. The subject of task no. 4 is the delivery, installation and calibration of symphony orchestra lighting together with effect lighting with an LED source in the Concert Hall. 2. The subject of the order includes 4 pieces of WASH moving heads. 3. Minimum requirements for each of the 4 heads supplied: 1) High resolution optical system with a minimum zoom of 12:1. 2) Beam aperture: min 4.5° to 56°. 3) Fast linear zoom. 4) 37 lenses with dimensions of min. 50mm. 5) Front lens panel with a maximum diameter of 400 millimeters. 6) 37 pieces of LED sources with a minimum parameter of 950 RGBW lumens. 7) Total luminaire power not less than 24,000 lumens. 8) CRI not less than 85. 9) LED lifespan not less than 40,000 hours. 10) Resolution: 8 or 16 bit. 11) Stepper motors operated by microprocessors ensure high accuracy and smooth movements. 12) Automatic return to the set pan/tilt position in case of physical interference with the device. 13) Unlimited range of motion in pan and tilt. 14) Advanced 4-color RGBW mixing, achieving high color rendering index CRI 15) Uniform light beam without shadows. 16) At least 8 bit color mixing. 17) Virtual color wheel, including most standard white color temperature settings 18) 2D and 3D graphic effects capabilities 19) Effects can be combined with beam, wash or matrix applications 20) Built-in effect patterns with speed and fade control for stage applications 21) Individual control of each pixel. 22) Possibility to read the temperature and number of operating hours from the device menu. 23) Thermal protection to protect against damage. 24) Electronic dimmer from 0 to 100%. 25) White or colored strobe effect. 26) Remote DMX addressing of the fixture and optional parameters using a standard RDM controller 27) DMX. 28) Integrated CRMX TiMo™ RDM wireless receiver from LumenRadio™. 29) 5-pin male and female XLR connectors. 30) etherCON RJ45 IN/OUT connectors for ArtNet™ connection. 31) PowerCON TRUE 1 male connector for power supply. 32) DMX 512 protocol, via cable or system. 33) DMX-RDM compatibility. 34) Support ArtNet™ & sACN protocol. 35) 3 DMX modes. 36) Maximum power not exceeding 1500 W. 37) 230 volt power supply support. 38) Possibility to select cooling modes: automatic, stage and studio. 39) Weight not more than 30 kg. 40) Permissible operating temperature from not less than -5 to 45 degrees Celsius. 41) The device should be able to be mounted and operated both vertically and horizontally. 42) The device is to have two hand grips for carrying located at the base of the base. 43) The device is to have a dedicated hook for mounting a safety rope. 44) The device should enable the installation of hooks across and along the truss. 45) The device must enable continuous operation without interruption for at least 240 hours. 46) The device is to have its own independent battery that maintains configuration parameters such as address and mode and allows them to be changed without mains power. 47) The device library must be delivered in the GDTF file standard and as separate, independent library files for the MA Lighting GrandMA 2 and GrandMA 3 system consoles, Avolites Titan system from version 12 and above, Chamsys MagicQ. 48) The device should be able to update the firmware locally at the ordering party. 49) Compatibility with Ayrton Zonda 9 FX devices owned by the Polish Baltic Philharmonic, i.e. documented documentation of at least identical operation of effects, dimmer, color mixing, color temperature, cooling, liquids, PAN/TILT movements, zoom operation, identical device library. 4. Additional equipment: Each device is to be equipped with two dedicated black aluminum certified hooks for trusses (50 mm pipe), a two-meter long mains power cord terminated with a Schuko plug on one end and a Powercon True1 type plug on the other, a five-meter XLR cable terminated with a plug and a 5-pin XLR socket, a five-meter mains extension cable terminated with a Schuko plug on one side and a tee separating plugs on the other schuko, certified black safety rope with a screw-on carabiner/shackle mounted in a dedicated holder in the device, cardboard box for storage;