84 - MOLLE Manpack Radio Carrier Set and Components

Solicitation SPE1C1-26-R-0061 is currently available on DIBBS and will be issued as a total small business set-aside and utilize a best value tradeoff approach. The Government intends to make a single award to the responsible offeror who meets all terms and conditions of the solicitation and is determined to be the best value to the Government after an integrated assessment of technical merit and price. The proposed acquisition is for the manufacture and delivery of the modular lightweight load-carrying equipment (MOLLE) Hinge Modular System (HMS) Manpack Radio and Components, which are made in accordance with CO-PD-02-02R dated May 9, 2024.

This acquisition will result in one (1) award for a firm-fixed price, indefinite delivery, indefinite quantity type contract. The contract shall be for a term of 36 months and will include three (3) separate pricing tiers. Each tier shall be for a 12-month period.

FOB destination and inspection and acceptance at origin. The NAICS code is 315990 - Apparel Accessories and Other Apparel Manufacturing; the size standard is 600 employees. A.

Carrier, HMS Manpack Radio Set / 8465-01-718-3331 Unit of Issue: Set (SE) Minimum QTY Annual Estimated QTY Maximum QTY Tier 1 165 SE 660 SE Tier 2 660 SE Tier 3 820 SE 2,675 SE B. Components Packboard / 8465-01-718-3341 Rucksack / 8465-01-718-3344 Bag, Accessories / 8465-01-718-3346 Pouch, Tubular, Antenna / 8465-01-718-3352 Harness, Packboard / 8465-01-718-3356 Unit of Issue: Each (EA) Quantity Over Tier 1 through Tier 3 Minimum QTY Annual Estimated QTY Maximum QTY* Packboard 0 EA 800 EA 3,000 EA Rucksack 0 EA 800 EA 3,000 EA Bag, Accessories 0 EA 800 EA 3,000 EA Pouch, Tubular, Antenna 0 EA 800 EA 3,000 EA Harness, Packboard 0 EA 800 EA 3,000 EA *The government reserves the right to make conversions of available quantities of these components provided the overall maximum quantity or maximum dollar value, when combined is not exceeded. The best value tradeoff source selection procedures will be in accordance with the DoD Source Selection Procedures dated August 20, 2022.

The trade-off will allow for an integrated assessment of PDMs, past performance, and a fair and reasonable price to determine the best value to the Government. Passing PDMs and Past Performance when combined are more important than cost or price. As other evaluation factors become more equal, the evaluated price becomes more important.

Refer to Section L and Section M for evaluation factor details. Offerors are advised that if they take exception to any of the terms and conditions in the solicitation, their offer may be excluded from consideration of award. The solicitation’s Non-Cost/Price Evaluation Factors, Sub-factors, and Sub-elements (listed in order of importance): a.

Technical Evaluation Factor: product demonstration models (PDMs) (All sub-factors are of equal importance) i. Evaluation Subfactor: 1. Visual Requirements 2.

Dimensional Requirements b. Evaluation Factor: past performance – performance confidence assessment (All sub-factors are of equal importance) i. Evaluation Subfactor: 1.

Recency 2. Relevance 3. Past Quality of Products a.

Sub-element: Past Quality b. Sub-element: Past Delivery Performance 1. Product Demonstration Model (PDM) Requirement : Two (2) fully assembled sets (SE) of Carrier, Radio Set, MOLLE, HMS Manpack Radio (NSN 8465-01-718-3331) shall be examined for visual and dimensional requirements.

For PDM purposes, all sewn-in labels shall be sized to the requirements but left blank and are for placement purposes only. a. NOTE: No alternate materials shall be used – the only exception is color. All color substitutions shall be called out and must include drawing number and find number of component or otherwise will be classified as a defect.

2. Past Performance Evaluation : Offeror’s record of past performance must be returned with complete information provided in accordance with Section L of the subject solicitation. 3.

Price Evaluation : All offered prices will be evaluated against the requirements of the solicitation. The offered prices (and if requested with initial proposal or during discussions, cost or pricing data or information other than cost or pricing data) will be evaluated in accordance with FAR 15.4 to ensure that award will be made at fair and reasonable prices. Offeror must provide a unit price for each tier and NSN within Section B of the subject solicitation.

FAT Requirement : A First Article Test (FAT) is required under clause FAR 52.209-4, First Article Approval—Government Testing--Alternate I. The contractor shall bear all costs. Under this clause, two (2) fully assembled sample set (SE) shall be submitted of Carrier, Radio Set, MOLLE, HMS Manpack Radio (NSN 8465-01-718-3331) 60 days after the date of award.

First article test samples will be examined for visual, dimensional, and fit (if applicable in accordance with the specification). All material shall be contractor furnished. Offerors are cautioned that all components must be of domestic origin in compliance with clause DFARS 252.225-7012 Preference for Certain Domestic Commodities.

Production Lead Time (PLT) : The production lead time for the first delivery order will be 90 days after FAT acceptance. All subsequent delivery orders will be 90 days after the date of order in block 3 of the delivery order(s). DLA Depots : Deliveries will be made to DLA’s third-party logistics (3PL) depots: 1.

UY0157 – Peckham Inc (Lansing, MI) 2. UY0159 – LVI-OCIE SE Pendergrass Distribution Center (Pendergrass, GA) 3. SD0131 – Travis Association for the Blind (Austin, TX) FAR clause 52.215-1, Instructions to Offerors - Competitive Acquisition is incorporated in this solicitation.

All offerors shall be registered in SAM to be eligible for award. All responsible sources may submit offers which, if timely received, shall be considered. Availability of solicitations, FAR 5.102(d) applies, as our office no longer issues solicitations or amendments in paper form.

It is estimated that the solicitation will be posted on https://www.dibbs.bsm.dla.mil/ within 15 days of this notice. Instructions for submitting offers will be provided within the solicitation remarks and contract sections. Detailed system requirements and instructions for registration can be found on the DLA DIBBS Home Page accessed on https://www.dibbs.bsm.dla.mil/.

A few highlights of the information that will be found include: A. On the DLA Internet Bulletin Board System (DIBBS) Home Page, click the VENDOR REGISTRATION link to begin the registration process. B.

To register for access to secure portions of DLA DIBBS, the company you are representing must already be registered in the System for Award Management (SAM). C. A Commercial and Government Entity (CAGE) Code registration will be processed immediately.

A User ID will appear on the registration screen and a password will be sent separately to the email address of the Super User. If a CAGE is already registered on DLA DIBBS, the name and email address of the Super User will be provided. The Super User should be contacted to set-up additional accounts, logons, and passwords for their CAGE.

DIBBS Super User: * If your CAGE has already been registered on DIBBS, the name and email address of the person designated as your super user will be provided. * The representative who starts the DIBBS registration process has the option to accept their System for Award Management (SAM) registration POC as the DIBBS super user, or they can designate themselves or another person to act as the super user for the CAGE. * The super user acts as the account administrator for a CAGE. They can add up to ninety-eight (98) additional users, provide user IDs and passwords, modify existing users, and control the login status of each user for their CAGEs through My Account (Account Maintenance). The Defense appropriations and authorization acts and other statutes (including what is commonly referred to as "The Berry Amendment") impose restrictions on the DoD's acquisition of foreign products and services.

Generally, Clothing and Textile items (as defined in DFARS clause 252.225-7012), including the materials and components thereof (other than sensors, electronics, or other items added to, and not normally associated with clothing), must be grown, reprocessed, reused, melted, or produced in the United States, its possessions or Puerto Rico, unless one of the DFARS 225.7002-2 exceptions applies. DLA Troop Support has launched the Technical Data Management Transformation (TDMT) system as the new DLA technical document repository for Technical Data Packages (TDP). TDMT is accessible through the DIBBS platform’s homepage.

Under “DIBBS Notices” there are several topics on TDMT access, user assistance and appropriate help desk contact information for troubleshooting. NOTE: It is highly recommended that offerors ensure enrollment and access to TDMT, as it is the dedicated source to view Technical Data Packages (TDP). Offerors should ensure that multiple authorized personnel have TDMT access to avoid disruptions caused by personnel absences or availability issues. DLA Troop Support is not responsible for and will not provide accommodation if offerors fail to access TDMT in DIBBS because authorized personnel are unavailable or lack the required registration or system access.