Supply, Delivery and Installation of Pulmonary Equipment - Lot Bid (epa)

Unit Description Quantity Unit Cost Total Cost Unit "MECHANICAL VENTILATOR MACHINE" 1 1,500,000.00 1,500,000.00 Technical specification:-High end-3 in 1 operate volume and pressure type of ventilation (Adult, Pediatrics and Neonatal)Neonatal (2ml-200ml)Pediatrics (20ml-400ml)Adult (100ml-200ml)

• with TFT LCD at least 15.6 – 19 inch touch screen monitorResolution at least 1366 x 765 pixels with anti glaremonitor must be 360◦ rotatable.Multilingual user interface-Turbine based, electric, electronically controlled
• Must be able use in non-Invasive Ventilation.- With self-check system for leakage (leakage check)
• Must have automated trigger adjustment both flow trigger and pressure trigger.
• Must be capable to transfer all recorded logs via USB by the end-user.
• Must have a quick start system and calibration
• Must have a advance automated adaptive assisted wide-range ventilation system with electronic microprocessor controlled by volume and pressure for Neonates, Pediatrics, Adults.
• Must be integrated self-check system with leak check and system tightness
• With volumetric capnography for CO2
• With standard ETCO and SpO2 interface
• must be able to operate environment temperature of 5-40°c.
• must have lock screen
• Must have built-in nebulizer
• Must operate using dual limb tubing and connected active humidifier chamber.
• Must have back-up power source battery at least 6 hrs in operation.
• Detailed technical requirements: provide following standard ventilation:a. A/C PCb. A/C VCc. A/C PRVCd. SIMV PCe. SIMV VCf. SIMV PRVCg. Control ventilation- pressure control (PC) in volume controlh. Support ventilation- pressure support (PS/ CPAP) i. Combine Ventilation- SIMV(VC) + PS and SIMV (PC) + PS and airway pressure release ventilation (APRV) / biphasic or equivalentj. Must operate at least in 10-20 kinds of mode include Invasive and Non-invasive
• Control Parameter must beTidal volume:2ml to 2000mlFlow trigger: 0 to +15 l/minPressure trigger: 0 to – 20 cmH20Pressure control: -5 to 90 cmH20Pressure support: -0 to 80 cmH20,added to PEEP/CPAPPressure ramp: 0 to 2sExpiratory trigger sensitivity:OFF, 5 to 90% of inspiratory peakPeak flow spontaneous:≥200L/min
• Must have special function:Inspiration holdExpiration hold100% o2 suction
• Configuration:
• User adjustable settings : brightness, sound, remote control of detection, truncation cut-offs
• Display parameters : a. Numerical and graphical trendb. Inspiratory volumec. Inspiratory pressured. Frequencye. Pressure support above PEPf. Oxygen concentrationg. Positive end expiratory pressureh. Peak inspiratory flow rangei. Inspiratory timej. Flow pattern: square and deceleration rampk. Inspiratory rise timel. Flow and pressure trigger sensitivitym. Alarm silentn. EtCO-time Waveformo. SPO2-time Waveformp. Flow-volume Loopq. Flow-pressure Loop
• Include: Spo2 probeProximal/external flowSensor for(neonatal)Heater baseAVR 2 set Oxygen regulator with hose and 1 set compress air regulator with hoseTest LungPhysical/chemical characteristics:
• Components : monitor, trolley, arm, AVR and body
• Mobility/portability: free movement by pushing and pulling in the area, must be less than 30 kgs.
• Raw materials : Polypropylene plastic and stainless steel
• warranty 3 yrs PMS and Calibration service.
• 1 warranty parts Unit "TRANSPORTATION VENTILATOR" 1 1,500,000.00 1,500,000.00Specialized MRI compatible transport ventilator, non-magnetic transport ventilator designed for safe use up to 3 to7 Tesla
• No Electrical Components Pneumatically driven and does not rely on electrical power during operation
• Eliminates concerns regarding battery failure and MRI electromagnetic interference, No battery dependence.
• Dimension: at least 358mm(H) x 290mm(W) x 245mm(D)
• Ventilation Mode: Minute Ventilation and Manual Ventilation, optional advanced mode
• Weight: 7 to 7.5 kg
• Pneumatically controlled
• No demagnetization required
• Mounted on a transport trolley, Non-magnetic trolley,
• Controlled Parameters: a. FiO2 60%-100% b. Minute Volume 3-20L/min c. Frequency 10-60 bpm d. PEEP 5 to 20 cmH2O e. Pressure alarm limits and gas alarm limits, f. Gas Supply pressure 0.28 to 0.6MPa g. Oxygen gas supply pressure 0.28 to 0.6 MPa with pipe connector DISS h. Environmental specifications: 1.Temperature -18 to 50°C(operating);-20 to 55°C (storage); -20 to 55°C(transportation) 2. Barometric Pressure 70 to 110 Kpa (operating); 55 to 110kPa (storage, transportation)3.It can be placed in an environment with a magnetic field of less than 200mT or at least 0.5m from the center of the cavity opening of the MRI machine4.Safe for MRI environments and can be used in 1.5T, 3.0T, and 7.0T MRI environments Includes: 1.Trolley, MRI compatible Uses2. standard non magnetic at least 6.3 L oxygen cylinders.
• Flow regulator
• Shock resistant manometer
• GCE (gas-controlled equipment) medical valve
• warranty 3 yrs PMS and Calibration service.
• 1 warranty parts Unit "WRIGHT SPIROMETER MARK 14" 1 450,000.00 450,000.00Wright spirometer: Mark 14 Respirometer, portable mechanical analog spirometer/respirometer, dial-type display, measurement range 0-10 liters, accuracy ±2% or better, no power requirement, complete with mouthpieces, adapters, carrying case, calibration certificate, operation manual one (1) year warranty.
• Mark 14 Respirometer or Equivalent
• Type: Mechanical portable spirometer
• Display: Analog Circular Dial Display
• Volume Range:0 to 10 Liters
• Scale Resolution: Clearly graduated analog scale
• Accuracy: ±2% of reading or better
• Flow Direction Indicator: Integrated flow direction marking
• Operation: No batteries or external power required
• Housing Material: Durable metal construction, corrosion-resistant
• Calibration: Factory calibrated with calibration certificate
• Weight: Lightweight, handheld design
• Cleaning: Suitable for cleaning and disinfection according to manufacturer recommendations
• Intended Use: Measurement of Vital Capacity (VC), Tidal Volume (TV), and Expired Lung Volumes
• Mounting: Handheld and portable operationStandard Accessories
• The unit shall be supplied with:
• Complete Wright Mark 14 Respirometer
• Mouthpieces (reusable and/or disposable)
• Respiratory tubing adapter
• Carrying/storage case
• User manual
• Calibration certificate
• Cleaning and maintenance instructionsone (1) year warranty.

Delivery / Contract Period: 30 Day/s Pre-Bid Conference: 05/11/2026 10:00 AM at MCC CONFERENCE ROOM, ADMINISTRATIVE BLDG., DEDVMH COMPOUND, BOOD, UBAY, BOHOL