Purchase of Csongrád ferry, related services Purchase of Csongrád ferry, related services

Purchase of Csongrád ferry, related services Purchase of Csongrád ferry, related services
I. Procurement of a small ferry boat Quantity: 1 pc 1. In order to submit the appropriate offers, the contracting authority presents the subject of the public procurement procedure below: A single or multi-hull, open or closed deck small boat designed with an edge-running bow under the waterline and a mirrored stern, which is designed for the transport of persons and has the registration number K-1747 (or main size L=26.9m, B=6.45m) suitable for ferry transmission. Passengers are transported in and out with a delivery space on both sides of the ships hull. The newly built floating facility will operate according to the following three modes of operation: - Small machine boat (railboat), - Ferry transfer small machine boat, - Pontoon bridge transfer small machine boat. 2. Water area classification of the swimming facility during planning: protected water area, (according to DNV-GL C [R4]). The place of operation is the Tisza river. 3. The offer may only refer to the swimming facility specified in (Purpose, type, destination of the vessel). In this regard, a new floating facility is considered to be a vessel that, when put into operation, was neither in Hungary nor abroad, nor was it used as a demonstration or test vehicle. These clauses also apply to all elements and subassemblies used during shipbuilding (e.g. engine, gear, anchor windlass, etc.). At the time of handover to the Customer, the time elapsed between the date of production and commissioning does not exceed 180 calendar days. 4. The swimming facility can be operated in a temperature range between -10°C and +50°C. 5. As part of the offer, a General layout drawing or Offer drawing and the detailed technical description of the swimming facility must be submitted. 6. The swimming facility must be operational throughout the year in its own operating area. All built-in materials and systems necessary for operation should withstand the damage and temperature of operation in river conditions and be functional in this environment with careful use by the crew, but without special measures taken by them. 7. All systems on the swimming facility must be designed for continuous operation, unless the technical description states otherwise. The swimming facility should have the following planned main dimensions: - Length Lmax = 11.0 m – 13.0 m - Width Bmax = 3.0 m – 4.0 m - Main engine power min: 110.0 kW Deadwater speed requirement with full number of passengers, equipment and filled supplies: - In separate passage: min. 15 km/h. - In ferry operation: min. 10 km/h. Metal structure, single or multi-hull, welded design. Training: The staff must be taught the specifics of driving and daily maintenance of the swimming facility while on the water, while the vehicle is operating, taking into account the weather and navigation conditions. Its duration: min. 8 oclock, location is the ships station in Csongrád, number of people: 4 people. The handover and acceptance of the swimming facility takes place in Csongrád in the port in the commissioned state, with filled supplies and valid Hungarian documents, based on the pre-agreed trial program. II. Provision of a substitute small craft in the framework of a rental scheme: The tenderer operates a pontoon bridge and a ferry crossing in Csongrád in the 12+337 km section of the Csépa - Csongrád connecting road number 4513. The purpose of securing the replacement small motor vessel is to ensure that the operation is ensured with the replacement small motor vessel until the arrival of the vessel referred to in the above point Procurement of small motor vessel. The Bidder is obliged to provide the personnel necessary for operation, or - based on his own decision - may employ an operator to perform the operational tasks within the framework of a commission or business contract. The Bidder acknowledges and accepts that ensuring the operation of the replacement vessel falls under the jurisdiction of the Bidder, and expressly accepts this condition and irrevocably consents to it. The maintenance activities required for the daily operation of the replacement ship, as well as the provision of fuel and lubricants, are the responsibility and responsibility of the Bidder. The swimming facility must have the following planned main dimensions: - Length Lmax = 7.0m – 13.0 m - Width Bmax = 2.8 m – 4.0 m - Main engine power min: 60.0 kW The swimming facility must have maintenance and operating instructions in Hungarian (printed and on a USB stick), which contain the technical data of the hull, the engine, the equipment, and the regulations for operation and maintenance. Training: The staff must be taught the specifics of driving and daily maintenance of the swimming facility while on the water, while the vehicle is operating, taking into account the weather and navigation conditions. Its duration: min. 8 oclock, location is the ships station in Csongrád, number of people: 4 people. The handover and acceptance of the swimming facility takes place in Csongrád in the port in the commissioned state, with filled supplies and valid Hungarian documents, based on the pre-agreed trial program. THEreplacement ship can be new or used, with valid documents. The detailed technical requirements are contained in the Technical Description. 321/2015. (X.30) Acts with regard to the provisions of Section 46 (3) of the Government Decree. All references to a specific product, origin, type, process, activity, person, patent or trademark in the call for tenders and public procurement documents were made necessary by a clear and comprehensible definition of the subject of the public procurement, but the designation was made only for the purpose of a clear and comprehensible definition of the subject of the public procurement, and the Tenderer also accepts an equivalent offer on the condition that the equivalence - in case of doubt - the tenderer must certify.