Delivery of sound and lighting equipment for the Polish Baltic Philharmonic. Fryderyk Chopin in Gdańsk. 2) Delivery and installation of symphony orchestra lighting along with LED effect lighting in the Concert Hall: profile moving heads - 12 pieces

Delivery of sound and lighting equipment for the Polish Baltic Philharmonic. Fryderyk Chopin in Gdańsk. 2) Delivery and installation of symphony orchestra lighting along with LED effect lighting in the Concert Hall: profile moving heads - 12 pieces.
1. ATTENTION! TOO ENOUGH SPACE IN THE ADVERTISEMENT - see Annex No. 1 to SWZ - full OPZ. Theres info. about additional equipment! 2. Minimum requirements for each head - NOTE, additional functionality is the criterion for evaluating offers for this task: 1) White LED light source with a power of at least 750 W. 2) Light source power of not less than 55,000 lumens. 3) The light output of the device is not less than 34,000 lumens. 4) Average life of the light source is at least 39999 hours. 5) Zoom range not less than 4-52 degrees controlled by DMX. 6) Device tightness class – IP65. 7) Color of the device – black. 8) Native CRI minimum 70, if it is below 95, the device must have DMX-controlled filters CRI 80 (+/- 5 percent) and CRI 90 (+/- 5 percent). 9) Illuminance of the device measured from five meters - at least 150,000 lux. 10) Native color temperature of the source 6700 K (+/- 10%) 11) Lens diameter not less than 180 mm, not more than 250 mm. 12) DMX-controlled CTO shield with a color temperature range of at least 3200K to 6500K, DMX-controlled with an accuracy of at least 8 bits. 13) Green color correction controlled by DMX with an accuracy of at least 8 bits. 14) Permissible operating temperature at least from -30 to 50 degrees Celsius. 15) A system of at least 4 DMX-controlled profile knives enabling cutting of the light spot - the knives should enable complete closing of the outgoing light stream. 16) Static gobo wheel with at least 8 gobos (each replaceable) and one empty slot, controlled with DMX with an accuracy of at least 8 bits. 17) A moving gobo wheel with at least 7 images that are interchangeable, indexed and rotating, controlled by DMX with an accuracy of at least 8 bits. 18) Animation disc with adjustable speed and direction of rotation, controlled by DMX with an accuracy of at least 8 bits. 19) Two color discs, each with at least 4 colors + white 20) Color mixing system implemented using CMY discs, regulated by DMX with an accuracy of at least 8 bits. 21) One independent linear prism, rotating with adjustable direction and speed; 22) One independent round prism, rotating with adjustable direction and speed; 23) Motorized iris. 24) The device should enable the user to replace Frost filters with other ones on their own. 25) Zoom, focus and IRIS adjustable via DMX with an accuracy of at least 16 bits. 26) Dimmer operating in the range from 0 to 100 percent, adjustable via DMX with an accuracy of 16 bits. 27) Electronic strobe function with a frequency of not less than 1 to 15 Hz. 28) Dimming accuracy of not less than 18 bits. 29) Built-in physical pan and tilt lock for the need to move and store the device. 30) The device must be prepared to operate continuously for a minimum of 240 hours. 31) The device must have at least two Frost filters. 32) The device is to be equipped with a powerCon True 1 power connector, 3 PIN and 5 PIN DMX input and output, RJ45 input and output, all in the IP65 standard. 33) Device weight up to 41 kilograms. 34) Device width maximum 490 mm. 35) Device height not more than 800 mm. 36) The device should be able to be mounted and operated both vertically and horizontally. 37) The device is to have two hand grips for carrying, located at the base of the base. 38) The device is to have a dedicated hook for mounting a safety rope. 39) The device is to enable mounting hooks across and along the truss. 40) The device is to have a system that reduces the level of vibration of the device during the movement of the pan/tilt motors. 41) The device is to be equipped with a display for controlling parameters that is touch-sensitive, colorful, self-leveling (the content is not displayed upside down), enabling access to registered service logs, and enabling programming of independent scenes. 42) The device is to have NFC connectivity and a publicly available dedicated application for the iOS and Android platforms, thanks to which it is possible to change configuration parameters such as address and mode from the application on the phone without the device being powered by the network. 43) The device is to support DMX 512, ArtNet, sACN protocols, 44) The device is to have CRMX wireless connectivity, fully compatible with the Lumen Radio system operated by the Polish Baltic Philharmonic. 45) The device in the basic operating mode cannot occupy more than 58 channels. 46) The accuracy of the devices operation in vertical and horizontal rotation is not less than 14 bits, the operating range of horizontal rotation is not less than 520 degrees and vertical rotation is not less than 250 degrees. 47) The devices power supply range is at least 100-230V. 48) The device must have an internal electrical fuse installed to protect the device. 49) Maximum current consumption during operation up to 1300W. 50) The device library must be shipped inGDTF file standard and as separate independent library files for MA Lighting GrandMA 2 and GrandMA 3 system consoles, Avolites Titan system from version 12 and above, Chamsys MagicQ 51) Possibility to change device settings via the RDM protocol or a dedicated application using NFC technology; 52) The device should enable diagnostics and changing settings via the Ethernet interface. 53) As part of its operating mode, the device has a silence/quite mode, during which the device will not generate more than an average of 42 dB(A) with static spot lighting with the dimmer set to maximum power. 54) The device must have functions that prevent the image from flashing in the camera (flicker free). 55) The device must be able to update the firmware locally at the ordering party;